Electric heater H30-RS1 (3.0 kW)

High-performance flow-through electric heater designed for heating and maintaining a stable temperature in outdoor pools, SPAs and massage (jacuzzi) tubs with a capacity of up to 6 people.

Thanks to the integrated temperature control, this heater does not require a separate electronic control board, making its assembly and use as simple and safe as possible.

Main advantages:

• Built-in thermostat: Mechanically adjustable temperature in the range from 0°C to 45°C.
• Safe protection: Equipped with a low flow sensor (prevents switching on without water) and automatic protection against overheating, which operates at 60°C.
• Quality materials: Durable stainless steel body combined with quality PVC and reinforced U-shaped immersion heating element (tenu).
• Clear operation: A light indicator is built into the side of the housing, which clearly indicates when the heater is actively heating water.

Technical specification:

Dimensions and connection:

• Pipe connection: Intended for direct mounting to 1.5 inch pipes (pipe outer diameter 48 mm). The corresponding 1.5" fittings (flanges) are included in the package.
• Thread diameter: The outer diameter of the suction and exhaust thread is 62 mm (can be matched with the flanges of the old heater if necessary).
• Electrical connection: The package includes a power cable with an industrial AMP plug.

• Body dimensions (H30-RS1): Length 226 mm |. Width 120 mm. 23 x 19 x 19 cm; gross weight 1.25 kg. risks:

   

  1. Flow sensor errors: If the pump does not provide a flow of at least 60 L/min (for example, a clogged filter), the heater will not turn on for safety reasons.
  2. Harmful deposits: Limestone and incorrect water pH or chlorine levels can damage the heating element or cause a short circuit, so the water chemistry should be checked regularly.
  3. Air pockets: Always make sure the system is completely vented before turning on the heater to prevent the "dry" skin from overheating.